Termofin F

Description

TERMOFIN F Thermal finishing in lime putty and fine hemp.
Indoor insulating finish made with lime putty and crushed hemp.
Hemp and ‘above all an excellent thermal and acoustic insulation, high breathability’, protection against mold and insects, great fire, light and rich in silica. But above all, and ‘a negative “carbon material”, which summarizes the carbon and reduces CO2 emissions in the atmosphere; then it makes the environments in which and ‘applied more’ wholesome and also reduces polluting emissions of the building process.

Specifications

Contents: 16 kg.

Product composition: breathable finish lime putty, fine neutral hemp dust and other insulating materials.

Dilution: Two components.

Features: grain size from 0 to 1mm.

Estimated Theoretical consumption: 2-2.5 kg / sqm with two hands; the second coat according to surface.

Application: indoor and outdoor.

Preparation of the base:
The wall surface must be clean, free of dust, dirt and free of any traces of oils, fats, waxes etc … If the outside temperature exceeds 30 °, it is not recommended the application because the product must be stretched at room temperature between 5 ° and 30 ° in the absence of wind and not exposed to the sun. In this case, the support must be adequately wet with water and the applied material protected with Sunscreening towels.

It applies with a steel spatula through processing “smooth”, in a maximum thickness of 1mm with both hands with a 2 / 2.5 kg theoretical yield per square meter.

Storage: The material can be stored for 12 months from date of production in sealed containers, provided they are not exposed to frost and heat sources. The applicator must not modify the product in such a case ET Events & Technologies S.r.l.s. It assumes no responsibility.

Download Data Sheet